Camshafts Durations and profiles

Cam profiles and cam durations.
The cam shaft controls the inlet and outlet ports. A pear shaped lobe on the shaft keeps the valve closed until the pointy bit rotates producing lift and opening the valve. Double overhead cams have separate profiles for inlet and outlet ports and are more tunable than single overhead cams. The timing of the opening and closing of the port can greatly affect engine characteristics. Manufacturers profile the cams to give good economy and reasonable performance through the low to mid rev range.

Different engines have different timing needs and a manufacturer has to fudge things to take a Friday engine into account along with an engine that has done 70,000 miles so you can see there is already vast room for improvement.

Cams help create more power (HP) in the mid to high rev ranges and come in the following types. (Its worth noting than in most applications high range Torque is unchanged but low range torque can suffer. The degrees figure relates to the duration of the cam and a full 360° would not close the valves at all! This implies that ignition timing must also be reset for cam durations of 260° and above. A longer duration means more time to suck air and fuel into the engine.)

Mild Road Cam 257° – 260° Gives low end improvements and used in unmodified engines suitable for all car types and gives a smooth tickover. Fuel economy may actually improve and power and responsiveness will be greater.

Fast Road cam 270° – 285° Good compromise for a road car the tick over is still fairly smooth and emissions are within legal limits. A good choice for a car used daily and for weekend track use and perfect for a hot hatch. This profile still gives reasonable fuel economy and a choppy tickover.

Competition cams 290°–320° The best performance profile for an engine which works continually over 3000 revs. The tickover is very lumpy and irregular and the car is lumpy to drive round town. Fuel economy is pathetic and it is unlikely that a car with this fitted will pass any kind of emissions test.

Developments – Rover devised the VVC cam where the cam rotates within a rotating holder and creates a marvellous tunable engine. The cam durations and lift can be adjusted to match the engine speed – higher revs can give a different lift and duration to a slower engine speed. Originally devised for economy the VVC engine has become a tuners dream and in its 1.8 form the engine can be tuned to deliver upto 220 bhp (were not just talking cam modification here). Not surprising then that this engine is fitted to Lotus and MGF’s.

Hondas VTEC valve timing system is equally impressive and provides two stages of valve timing. As the revs climb the second stage is reached giving explosive power and an aircraft style scream. You get two cars for your money – an economical round town suipermarket cruisers and a track day screamer. The short cranks in Honda engines give a lot more rev range and redline at around 7000-8000 rpm a lot higher than engines of a similar size.

Other Power tuning guides:-

Join our FREE club
Tuning Principles
Bhp gain calculator
Tuning Tips
Gallery
Vedubbers
Rover & MG
Car Styling
Events

>> Chat forum <<

News
Track Day Tips

Drifting



LINKS page


Cheap car posters.