Bought a 58 reg Fiesta Zetec S last year I decided to change the brake fluid as part of good practice (2 year cycle).
I then discovered the previous owner/garage had broken off the bleed nipple on the nearside caliper.
There is about 1 mm of flared nipple left and enquire if anyone has any ideas as how best to remove it so I can replace with a new bleed nipple.
Thought about jamming a screwdriver in it and turning or even getting a screw/stud remover to see if I can back wind the old nipple out.
Any ideas are welcome.
I then discovered the previous owner/garage had broken off the bleed nipple on the nearside caliper.
There is about 1 mm of flared nipple left and enquire if anyone has any ideas as how best to remove it so I can replace with a new bleed nipple.
Thought about jamming a screwdriver in it and turning or even getting a screw/stud remover to see if I can back wind the old nipple out.
Any ideas are welcome.