I suggest that Ibizz starts a project thread in the gallery forum and keeps us posted with his results. I will be interested to see how it goes for you.
I don't think anyone on here has been rude or predjudiced about your cars engine. We see a lot of people try things like this on their car only to watch the engine fail a little bit further down the line.
You do get what you pay for so doing things on the cheap is often a false economy.
I wish you well in your project in doubling the power of your 1.9 diesel engine from around 70bhp, this is what the spirit of car tuning is all about.
However in my experience standard internals on a diesel engine can only be pushed about 50% higher before problems start appearing a year or so later on.
Your 1Y engine is pretty detuned and underpowered so you might actually get away with it.
A friend of mine put a Turbo on his Civic and it took him about 50 hours of work and cost about £4000 in parts to get it to work properly. He only budgeted initially for £1500 but this is an extreme example as the car wasn't a turbo to start with.
You must get the fuelling, timing and wastegate control spot on - there is no room for errors when you are pushing a car that much. You will also need to upgrade the oil you use and I'm pretty sure the gearing will be too low for the new engine which is good for acceleration but makes it hard to live with in traffic as you will be constantly changing gear.
I hope this helps.
this is an aswer , and help
i can take something from aswer of waynne .
now by the aswer impossible , i can take nothing . only feedback of closed mind .
the gear box , i know it il be short .
thats good im not looking for speed
but if needed il change by gtd 1.6 one that is plug and play in my engine .
same as gtd pump with lda .
il try to post a pic of 1 engine like mine , with subaru turbo on and a big hole in block becouse forgot to torque something ...
i know you guys il say , that what apens... but that engine as worked in extreme , with more than 2 bars of turbo pression ,without ic , oil cooler etc.
but at least some one here il know whats a 1y engine is ...
sorry wayne
but i hate when people says its impossible , when dont even know what engine it is... just becouse never see it before ..
if you dont try ... you il never know
standart factory stuff , every one know
do things that already are done , no fun in that .
fun is to prove its possible , what almost everyone says is impossible ..
like that sdi one in dyno , even mecanics says its impossible , when they see the numbers , start thinking of it ... and what they think its impossible , are playing with very very very high budget projects