MW52KER Full member Points 23 Location Studley Car Mercedes ML 24 June 2017 #1 Is it possible to adapter or convert any auto tranny with manual override to work with paddle shifters?
Is it possible to adapter or convert any auto tranny with manual override to work with paddle shifters?
claymore The Torque Meister Points 497 Location Shrewsbury Car T-10k, 24 June 2017 #2 Easily I would have thought, a couple of solenoids and an arduino.
old-git Moderator Points 657 Location Essex Car Elan & Robin Hood 16 July 2017 #3 As long as the shift is in a straight line. The only problem I can see (assuming my first proviso is OK) is that the lever on sequential boxes returns the the original position after each shift, whether that is up or down the gears.
As long as the shift is in a straight line. The only problem I can see (assuming my first proviso is OK) is that the lever on sequential boxes returns the the original position after each shift, whether that is up or down the gears.
obi_waynne Administrator Staff member Moderator Points 1,157 Location Deal, Kent UK Car A3 1.4 TFSI 150 COD 10 August 2017 #4 Older auto boxes only have a few long gears, would it not be easier to drop in a modern box?