iancav6
New member
Hi to all on the drag racing section.
This is my Cavalier 3.0 V6 which I have owned for 7 years and slowly improving for the drag strip.Its spec is;
3 litre Omega V6
Ported and skimmed cyl heads
Omega intake manifold
Homemade 6-2-1 exhaust manifolds
Stainless exhaust
Canems ecu
K&N air filter with cold air feed
Std F25 gearbox
Koni adj dampers
Lowered 25mm on front axle
Cav turbo rims
When I first bought it as a 2.5 I ran 15.7 @ 89 which was about right according to the road tests.Best time so far is 14.4 @ 98 with a 60ft of 2.2,have now got some Toyo R888s to try and get the 60 ft down a bit.Am planning on going to the Saturday night special at the pod in October where I will run the Canems ecu for the first time.
This is my Cavalier 3.0 V6 which I have owned for 7 years and slowly improving for the drag strip.Its spec is;
3 litre Omega V6
Ported and skimmed cyl heads
Omega intake manifold
Homemade 6-2-1 exhaust manifolds
Stainless exhaust
Canems ecu
K&N air filter with cold air feed
Std F25 gearbox
Koni adj dampers
Lowered 25mm on front axle
Cav turbo rims
When I first bought it as a 2.5 I ran 15.7 @ 89 which was about right according to the road tests.Best time so far is 14.4 @ 98 with a 60ft of 2.2,have now got some Toyo R888s to try and get the 60 ft down a bit.Am planning on going to the Saturday night special at the pod in October where I will run the Canems ecu for the first time.