Engine Spec
RB30 vl 3ltr block. skimmed and crack tested new sleeves core plugs etc
RB25 2.5ltr 24 valve twin cam head, gas flow and ported and skimmed race spec
Weisco custom made forged Pistons,
Crower billet custom made con rods,
ACL Race series Bearings
Nitrided & knife edged crank rotation assembly balanced,
Billet crank pully
Tomie procams 280 10.8 lift inlet 270 10.25 lift exhaust
oversized and longer uprated gtr vlaves ,
Tomie gtr valve springs retainers
Tomie GtR Solid lifters
0.9mm Steel headgasket,
ARP Main and head stud kits
1000cc top feed bosch Injectors,
Greddy 11mm billet fuel rail
HKS Iridium Plugs,
Tomie duralium adjustable Cam pulley,
Turbonetics GTK 850 turbo
Turbonetics Racegate wastegate,
Aeromotive 13110 adjustable race fuel regulator 700lph return,
Turbonetics Raptor bov,
custom T4 Exhaust manifold made from imported 321 stainless steel tuned to peak power between 5-8.5k rpm,
Full Stainless 4” Trust Exhaust system 5” tailpipe
Jun ram ported side mount plenum
90mm throttle body,
Coolmist water / Methanol injection
HKS superflow induction kit,
large 800mm core Front Mount Intercooler with hard pipe set up,
Davies Craig EWS110 electric water pump
Greddy Aluminium race radiator
Twin electric radiator fans
Electric power steering pump
Haltec E11v2 Plug and Play stand alone ECU,
Haltec Cold air temp sensor ( no AFMs )
Haltec 3 bar Map Sensor,
Haltech Idle Speep control valve
Haltech Throttle position sensor
Haltec Launch Control & full throttle gear shift
Haltec Anti Lag,
Haltec Data Login,
Nismo Front strut brace and brake stopper.
45ltr aluminium fuel cell
1x holly blue 180gph fuel pump
2x bosch 044 700bhp rated fuel pumps
2x 8mm fuel lines to fuel rail
1x 10mm fuel return line and fuel cooler
all aeroquip lines and fittings
Custom made Innovate performance Dry sump kit including billet pullies and all braided line, 7ltr oil tank
Alloy header tank
Racelogic traction control and launch cpntrol
Transmission
OS Giken 5 speed close ratio gear box
TS3b OS Gilken Tripple plate clutch inc flywheel which has been lightened and balanced with crank rods pistons ( rotation assembly balanced )
OS Giken Release bearing
Quickshift
Nismo large capacity master cylinder
GTR Rear Diff Casing
GTR Uprated 1.5way lsd
GTR Uprated Driveshafts
Brakes
356mm Ap Racing front discs
8 Pot Calipers front
330mm rear discs
6 pot callipers rear calipers
Race pedal box, with uprated servos attached to box
Solonoid fluid pots in engine bay
AP Racing pedal box and servose
all Braided lines
Hurst line lock
Suspension
Apex N1 Coilover suspension with adjustable bump and rebound
Front and rear strut braces
Cucso Rear subframe locking Kit
Front adjustable toe arms
Rear Caster and Camber arms
Wheels and tyres
For road Anteras 294
Front 235/40/18 good year eagle f1's
Rear 265/45/18 good year eagle f1s
Exterior
400r Front Bumper
400r Arch Externsions
Clear side and front indicators
Gandor Style Mirrors
Custom Bonnet Lip
Small bonnet vent
Nismo Rear Boot lip
61" Carbon GT Drift Wing
custom croma green respray
Interior
Haltec digital dash
Apexi RSM with G Sensor
6 point Saberg FIA Harness’s
Full weld in custom made FIA roll cage ( touring spec )
Cobra Monaco S FIA front bucket seats
Cobra base mounts
Custom made wiring harness with all unnecessary wires removed to save weight( anything not needed ie hicas, interior lights etc has been removed so no need for wires )
All sound deadening removed from all panels to save weight
Parts possibly coming soon
Custom undertray
Rear underbody diffuser
Carbon dash and door cards