I agree but i cannot workout how to trace it as i cannot match up the ECU Pins with the haynes diagram and a continuity test aint helping me as i get a reading from more than one wire on the ECU plugs.
Lets look at this logically for a second, Instead of me asking how to identify the ECU Pins...
Maybe not the ECU at fault then but without knowing what wire is what on the ECU plugs i dont know how to rectify the problem???
I tried a continuity test from pin 7 to a few of the suspected wires on the ECU's plug and ended up getting a reading from more that one of them so im confused as to...
Cheers mate, Yes it is located next to the drivers right knee although i do not have cruise control lol
The no voltage on pin 7 can only be down to 1: A break in the wire 2: Faulty ECU and 3: A short somewhere but without knowing what pins on the ECU's relate to what wire's in the Haynes manual...
Yes tried that and as far as i know the stereo is stock, however i cannot be sure as the stereo's anti theft audio alarm is present if i turn the radio on. I've not long had the car and the battery was disconnected when i got it so im assuming that's the reason for the stereos audio alarm.
I...
Hi guys,
I think i have a problem with my cars OBDII port as it has no voltage or any kind of reading on pin 7 (k-line). I only know there is surpose to be voltage of arround 3.5v on this pin from watching a youtube vid of someone checking the socket with a multimeter. The ground pins are...
Hi, i found this site by fluke and found some very interesting and friendly posts so i decided to register and say hello
I also have a problem with my cars OBDII socket that i would like to discuss but i will try and post in the appropriate section of the forums.
I look forward to speaking to...