Search results

I agree but i cannot workout how to trace it as i cannot match up the ECU Pins with the haynes diagram and a continuity test aint helping me as i get a reading from more than one wire on the ECU plugs. Lets look at this logically for a second, Instead of me asking how to identify the ECU Pins...

This was answered in the above posts mate :blink1:

Maybe not the ECU at fault then but without knowing what wire is what on the ECU plugs i dont know how to rectify the problem??? I tried a continuity test from pin 7 to a few of the suspected wires on the ECU's plug and ended up getting a reading from more that one of them so im confused as to...

If that is the case is it just a matter of cleaning up all the earth points and hoping my problem goes away or is there more to it?

Cheers mate, Yes it is located next to the drivers right knee although i do not have cruise control lol The no voltage on pin 7 can only be down to 1: A break in the wire 2: Faulty ECU and 3: A short somewhere but without knowing what pins on the ECU's relate to what wire's in the Haynes manual...

Sorry about that, will read over the forum rules again:embarrest:

Yes tried that and as far as i know the stereo is stock, however i cannot be sure as the stereo's anti theft audio alarm is present if i turn the radio on. I've not long had the car and the battery was disconnected when i got it so im assuming that's the reason for the stereos audio alarm. I...

Thanks i will give them a call

Thanks

Hi guys, I think i have a problem with my cars OBDII port as it has no voltage or any kind of reading on pin 7 (k-line). I only know there is surpose to be voltage of arround 3.5v on this pin from watching a youtube vid of someone checking the socket with a multimeter. The ground pins are...

Hi, i found this site by fluke and found some very interesting and friendly posts so i decided to register and say hello I also have a problem with my cars OBDII socket that i would like to discuss but i will try and post in the appropriate section of the forums. I look forward to speaking to...