Getting the best tuning mods for the SAAB 9000.

"9000 + remap = lots of fun."

The face lift model arrived in 1991 and made the 9000 a very credible alternative to the usual German executive cars. The only downside with the SAAB 9000 is expensive repairs but thankfully they are pretty reliable cars.

They are also quite heavy cars with all of their crash protection and insulation to cope with the cold Scandinavian climes.

 Engine choices 2.0 Turbo delivering 175bhp good for a 0-60 sprint in under 8 seconds. The 2.3t Turbo upped power to 200bhp and ran 0-60 in a shade over 7 seconds, then there is the massive 3.0 v6 engine which offers 210bhp and a 6.7 sprint to 60. All models return around 30mpg with the 2.0Turbo being the most frugal and will reach typically 32-33 mpg around town.

Tuning tips and articles

Engine tuning Transmission tuning Care care Intake & exhaust mods Improve handling Forums
Remaps on the Turbo engines are the best way to go, but don't overlook the braking or the handling.

Engine Tuning modifications.

The following modifications are usually performed by our members, decide how far you want to go before you begin.

Getting the right mods for your planned usage of the car is vital. Stage 3 (competition) mods just don't work well on the road.

Stage 1 mods: Exhaust, Panel air filter, Remap, lighter flywheel

Stage 2 mods: Fast road cam, ported and polished head, fuel injector & fuel pump upgrades, 

Stage 3 mods: Engine balancing, forced induction (turbo/supercharger), Internal engine upgrades (pistons/head/valves), competition cam.

Power on the 2.3T can be lifted to somewhere between 240 to 260bhp with a combination of remapped ecu, sports exhaust and induction kit with a cold air feed pipe. We would recommend limiting power to 250bhp for the best compromise as traction becomes a major issue when you exceed this.

Your aim when tuning should be a nice flat torque curve and a wide power band as we are always mentioning. Fast road cams offer one of the biggest performance gains as far as a bolt on part goes. You will need to ensure that the engine is not starved of fuel so will need to uprate the fuelling if power is increased beyond 40%. Look to aftermarket parts suppliers for uprated injectors and fuel pumps and in some cases you'll find that your manufacturer offers uprated options as fitted to performance models.

Intake and exhaust modifications.

Let's move on to the engine intake and exhaust and ensure proper flow through the engine. The cone filters or 'Induction kits' are only recommended if you have significantly increased the cars need for air, particularly on turbo engines and larger engines (providing they are fitted with a suitable cold air feed or air box), for the smaller 9000 engines you should go with a sports panel air filter made from a high flowing medium. A good high performance sports exhaust is an essential to balance your engines need for free flowing air, just adding an induction kit on it's own will do little to increase your power. See our article on performance exhausts for details of the issue around large bore exhausts and how to choose the right size for your engine.

Getting a professionally flowed head with larger valves can fully release the engines power. A good fast road power clutch will help to keep that power going where it should. Never just hope that a standard worn clutch will cope. Remaps offer significant power gains on all turbo charged cars. On NASP engines the benefits are doubtful. However a remap on a NASP engine will help unleash the potential if you have done a lot of mods. The largest power gains for NASP engines usually involve the addition of forced induction. Superchargers are generally easier to add than turbos. With a turbo the boost curve is related exponentially to the engine speed making it hard to map. The nice steady boost to rpm characteristics of the supercharger make them easier to map. Decreasing the engines compression ratio will allow you to add forced induction, water injection may also help prevent detonation.

Cars are heavy due to the strength and impact protection it offers so a bit of weight reduction will shave precious seconds from your 0-60 sprint times. Carbon fibre panels seem to be the way to go - if you can source some. The 9000's are built for the cold regions of Scandinavia and offer superb heating/climate controls, and the braking is noticably sharp.

Improve the handling with an adjustable spring and damper kit. This will make the car a lot more fun drive on bendy roads and give more driver feedback. An fuel boost valve and piston type diverter valve also works well on the petrol engined models.

Read through our tuning articles to see the pros and cons of each modification and join our forum to discuss all aspects of SAAB modifications with our enthusiastic and friendly members.

Please Check out my YouTube channel, we're regularly adding new content...

PLEASE HELP: I NEED YOUR DONATIONS TO COVER THE COSTS OF RUNNING THIS SITE AND KEEP IT RUNNING. I do not charge you to access this website and it saves most TorqueCars readers $100's each year - but we are NON PROFIT and not even covering our costs. To keep us running PLEASE Donate here

If you liked this page please share it with your friends, drop a link to it in your favourite forum or use the bookmarking options to save it to your social media profile.

Feedback - What do You Think?

Please use our forums if you wish to ask a tuning question, and please note we do not sell parts or services, we are just an online magazine.

Help us improve, leave a suggestion or tip

Your Constructive comments on this article, I really want to improve this article with your help and suggestions.


Please watch this video and subscribe to my YouTube channel.



Member Benefits

Join our forum today and benefit from over 300,000 posts on tuning styling and friendly car banter.

You will also have full access to the modifed car gallery, project car updates and exclusive member only areas.

(All car owners of all ages and from all countries are welcome).