Reshan1809
Newbie
Hello, there.
Am Reshan from mauritius.
Currently driving a citroen c5 with a DW10ATED engine, almost same as the peugeot 406.
Came by here, because citroen forum seems a bit dull, haha
Well, am having problems with my climate control.
As when I switch on, A/C should come up (if on obviously) with the blower running too. But instead, it all goes off and after a while (no indication of fan blades on dash) and the blower not running.
I went down to the driver side and landed on the heater resistor module, seemed to work fine( I don't know), 12V seems to be coming from the feed wires (upper plug, Red & Black wire)..
But the wires which hook up to the blower does not seems to have a voltage in them.
So I took a 12V feed from the glove box and connected it the wire, everything worked fine..
Blower is only running on a separate 12V feed connected accross it.
(blower speed and so can also be regulated, so guess it's not the resistor box, don't really know)
Can anyone help me here please.
Am Reshan from mauritius.
Currently driving a citroen c5 with a DW10ATED engine, almost same as the peugeot 406.
Came by here, because citroen forum seems a bit dull, haha
Well, am having problems with my climate control.
As when I switch on, A/C should come up (if on obviously) with the blower running too. But instead, it all goes off and after a while (no indication of fan blades on dash) and the blower not running.
I went down to the driver side and landed on the heater resistor module, seemed to work fine( I don't know), 12V seems to be coming from the feed wires (upper plug, Red & Black wire)..
But the wires which hook up to the blower does not seems to have a voltage in them.
So I took a 12V feed from the glove box and connected it the wire, everything worked fine..
Blower is only running on a separate 12V feed connected accross it.
(blower speed and so can also be regulated, so guess it's not the resistor box, don't really know)
Can anyone help me here please.
