Recent content by ghettokartel

Hi Guys, Last weekend I fitted my H&R lowering kit on my A4, rather than cost the original £80 quoted it cost £150. This is because the previous owner has tried to take the main bolt that holds the shock in place on both side of the car and snapped the heads off. the result was a total of 3...

Hi Guys, Got my brakes re-bled in a nice little garage in northampton. The guy also bled the cluch and master cylinder and the results are stunning.I can stop on an six-pence now!! I am really happy with the pads/disc'sI bought. Have any of you guys ever used the drilled and groved Black...

Oh, OK. PG'S order and the order in the Haynes manule are diffrent. The say front pas,front driver,rear pas then rear driver. Do you think is should disregards this and use PG'S method? Many thanks:blink1:

oh,ok. do they bleed all the points at once or is it one at a time like a convetenion bleed?

Got a booking to fit my H&R lowering kit on saturday, Think I have got a good price as they are only charging me £80 for labour. Has anyone got any experance with H&R products? and how will lowering the car 30-40mm change the ride/handeling?

PGARNER... Whats a vcds bleed?

Right,We did the bleeding in the way setout in the haynes manule which is as follows. front pas front driver rear pas rear driver we Didnt bleed the master cylinder,or the cluch or anything else. do you think that this maybe the problem. do you think that I should go to the garage and get...

Right, i have used a dot 5 fluid, not a dot 5.1. dot 5 is not mineral based, its silicon. I have read the instruction and it says that the dot 5 can be used togeather with a diffrent dot fluid but it will spoil the dot 5 fluid meaning it will retain moisture as normal brake fluid does and will...

Thanks wayne, and do you think that not using a diagnosis machine to do the change may have damaged the servo? personally I dont think so as I have done loads of manual fluid changes on toyota 4*4's whislt living in africa and we certanly didnt use no machine!

Hi Guys, Last weekend A friend of mine helped me change the standard disc's on my A4 fsi 2'0l petrol and put some drilled and groved black diamond ones. we also put black diamond predator pads and changed the standard brake line's for hel s/s braided. finally we changed the standard dot 4...

Hi Prince What tracking do you mean? Thanks Ben

Hi Guys. I am going to change my standard A4 springs and shocks and put a H&R lowering kit (complete springs and shocks with bushes). The kit lowers the back by 35mm and front by 40mm. In addition to this I am replacking the standard 16 inch rims with some 17's, and have put a thinner tyre so...

Got the proof of purchase thru the post this morning! still gona complain about the price...

I see hel do a braided titanium line kit which is ment to be the best and I should think so too as its over twice the price of the normal S/S type. I dont know how the diffrent materials affect the performance??!!

Ok, I will get on to my audi guy tommrow. Thanks Guy